The Canyon Live Edge Table Guide
Watch a Video Here:
Tools you will need:
-
Drill (highly recommended)
- T-20 screwdriver if drill is not available
Note: You may leave the table in the crate.
Step 1:
- Locate the letters on the base and on the table apron's end grain. Slide the bases into place.
Step 2:
- Locate the lines on the base plate. Move these into alignment with the inside of the aprons.
Step 3:
- There are 2 screws per table base. Install screws through table base into the table aprons. Make sure table is aligned.
Step 4:
- Thread a washer onto each bolt. Install bolts tightly with provided Allen wrench.
Step 5:
- Install button plugs to cover the screws.
Please contact us if you need any help!
help@dannerfurniture.com